Lockout/Tagout Training Certification
Control of hazardous energy. Trained September 9, 2026, through M&A Electric Company. Trainer: Mark Leonard. Designated competent person on site. Valid one year, through September 2027.
Commercial electrical apprentice
Jeffrey Cheney
Electrical Apprentice · Pell City, AL
Electrical apprentice at M&A Electric Company in Birmingham, Alabama, since July 2024. Started green on a large multi-family job, was one of the few people kept through layoffs, and stayed on through a company ownership transfer. Commercial work under a superintendent with more than 25 years in the trade. Skills come from that mentorship and from independent study, with lockout/tagout certification and a competent-person designation on site.
Credentials
Safety training sits up front. Dates are shown only where a document gives them.
Competent person on site
Jeffrey’s lockout/tagout card, dated September 9, 2026, notes that he is designated competent person on site. The training covers control of hazardous energy. Trainer: Mark Leonard. Employer on the card: M&A Electric Company. The card is valid for one year, through September 2027.
Mobile Elevated Work Platform, Type 3A and 3B
Operator and supervisor training, as listed on the resume.
Backhoe & Skid Steer Operator Certified
Certified operator for backhoe and skid steer.
American Heart Association CPR/AED
Listed on the resume. No issue date was included there.
Key skills
These four are the technical skills on his current resume. Each links to a plain-language explanation. They are skill areas, not a project log.
Blueprint Interpretation & Layout Planning
Reading the drawings and turning them into a layout that can actually be built.
Precision Conduit Layout & Installation
Measuring, bending, and installing conduit so the run lands where the print says it should.
Panel & Disconnect Termination
Landing conductors in panels and disconnects with the right lugs, torque, and labels.
277/480V Systems
Commercial three-phase power: 480 volts phase to phase, 277 volts phase to neutral.
Interests he is studying
Advanced conduit work, industrial plants, and data centers lead the list. These pages describe the work. They do not claim he has already done it.
Advanced conduit bending
Offsets, saddles, kicks, rolling offsets, and concentric bends, with the trigonometry written out.
Industrial electrical work
Motor loads, 480-volt distribution, cable tray, MCCs, and the habits of a plant job.
Data center electrical work
Redundant power, UPS, generators, switchgear, busway, PDUs, and commissioning.
Contact
Hiring managers can reach Jeffrey by email. He lives in Pell City, AL and works for M&A Electric Company in Birmingham, AL.
Pell City, AL